Zhengzhou IWD Diamond Co.,Ltd. www.iwdiamond.com


Home About Us Products Die Equipment News Services Contact Us
  Your Position: IWD Diamond dies >> News >> Industry News >> Index
Company News
Industry News
  Contact Us
Zhengzhou IW Diamond Co.,Ltd.
Add:No.1,Yulin,Shuangqiao, HIGH-
NEW Tech Zone,Zhengzhou,Henan,
Tel: +86-371-86082760
Web: www.iwdiamond.com
Email: sales@iwdiamond.com
  Industry News
How to distinguish the pros and cons of diamond wire drawing die 2017- 5- 5

In the purchase of wire drawing die, we always want to buy the product is the best, the best is no defect, so we must learn to buy a diamond die is good or bad, only will read , Can be selected to a most suitable of their own wire drawing die.

Tungsten alloy classification Introduction 2017- 3- 15

Tungsten alloy according to its composition can be divided into W-Ni-Cu, W-Ni-Fe two series and W-Ni-Cr, W-Ni-Mo, W-Ni-Co alloy.

Drawing die material selection and application characteristics 2016- 8- 10

Diamond and carbide drawing dies is the main material processing. Application of the two materials are very different, have their own characteristics.

Diamond drawing die drawing process operators should note matters 2015-12- 28

Die recipients should be familiar with the drawing process line, to distinguish whether the corresponding specifications and technology, or cause wasted effort, but also damage the wire and die.

Specific steps wire drawing die repair 2015-11- 27

According to statistics, China's annual consumption of only mold machinery industry as high as five times the total price of the machine. Thus, consumption of large quantities of mold, not only directly increase the cost of production, but also because of the frequent replacement of mold caused by frequent mass production line shut down, resulting in greater economic losses. Die drawing die repair technology will undoubtedly strengthen the life, good economic returns, can be applied to the surface of various iron-based alloys and other metal materials molds and workpiece strengthen and repair and a substantial increase in service life.

Wire drawing die directly affects the quality of silk 2015-11-16

For now drawing dies, it also has some manufacturers in the production, but it requires technical aspects very prominent, if it when in use, they can not meet the requirements, then the entire wire production also not qualified, we all know that, for the wire, the time it is produced, often fineness required multifaceted requirements.

Carbide die maintenance 2015-11-10

Steel production, consumption of drawing dies rupture and wear two kinds. Rupture of the mold can only be scrapped, worn mold can be repaired again, so production should be reduced as far as possible the proportion of mold fracture.

Use good-quality wire drawing dies have any effect 2015-11-5

Diamond drawing dies is a very important mold, inadequate if it is top quality, tend to give a great deal of influence yourself, then when there is insufficient quality of this mold, and what kind of impact it will give users? We all know, this mold is mainly applied to production above the wire, all such manufacturers, also must choose to use this mold as a mold, its production efficiency for the entire product will be influenced .

Wire South America 2015, Sao Paulo, Brazil 2015-6-1

wire South America will take place in parallel with TUBOTECH at the Imigrantes Exposicoes Exhibition Centre in Sao Paulo.

Wire Southeast Asia 2015, Bangkok, Thailand 2015-5-6

Wire Southeast ASIA / Tube Southeast ASIA 2011 will be held from 15 to 17 September 2015 at BITEC, Bangkok's premier exhibition venue.

Mold maintenance and repair 2014-10-28

Excessive wear will make the number of mold repair greatly reduced, or even scrapped, making the wire drawing costs increased.

Zhengzhou IW Diamond Co., Ltd. 2013-5-6

Zhengzhou IW Diamond Co., Ltd. ( IWD for short ) is a High-New Technology joint enterprise and Global company,specializing in the manufacture, supply and service of wire drawing dies and related tools&equipment.

About Us Products Services Contact Us
IWD specializes in high quality Natural
Diamond Dies and PCD Dies using PCD
Sumidia & PCD Diamond Innovative
blanks. PCD blanks are offered as Self
Supported , Thermally Stable up to 1700
degrees Celsius and Carbide Supported.
Single Crystal Diamond Dies
Polycrystalline Diamond Dies
Tungsten Carbide Dies
Specialty Wire Dies
Die Manufacture Products
Other Diamond Tools
Semi-Finished Products
Recutting Services
Company Map
Products Map
Zhengzhou IW Diamond Co.,Ltd.
Add: No.1, Yulin, Shuangqiao, HIGH-
NEW Tech Zone, Zhengzhou, Henan,
450001, China
Tel: +86-371-86082760
Web: www.iwdiamond.com
Email: sales@iwdiamond.com
Facebook Linked Google+ Twitter
Site Map | Diamond Drawing Dies | IWD Wire Dies
Copyright International Wire Dies Global All Rights Reserved
web stats